LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (Engine Cooling System) >> Repair Instructions >> Coolant Heater Cord Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Disconnect the engine coolant heater cord from the engine coolant heater.
  3. Remove the engine coolant heater cord straps.
  4. Disconnect the upper engine coolant heater cord from the diagonal brace strap.
  5. Remove the engine coolant heater cord.
    Fig 1: Removing Coolant Heater Cord
    G01811392Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals