LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 738 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement (Spoiler Mounted) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Important:  The lamp assembly has no serviceable bulbs. You must replace the assembly as a unit.

  1. Remove the spoiler. Refer to SPOILER REPLACEMENT - REAR in Body Rear End.
  2. Remove the spoiler mounted stop lamp retaining screws.
  3. Remove the stop lamp from the spoiler.
    Fig 1: Removing High Mounted Stop Lamp (Spoiler Mounted)
    G01779681Courtesy of GENERAL MOTORS CORP.