LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 738 (Lighting Systems) >> Repair Instructions >> Fog Lamp Aiming Procedure >> Preparation Procedure

Preparation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Important:  Horizontal aim is not adjustable on this vehicle. Vertical aim is done by an turning the adjusting screw located on the front of the fog lamp. Prior to aiming the fog lamps, perform the following steps:

  1. Completely assemble all of the components on the vehicle.
  2. Place the vehicle on a level surface.
  3. Stop all unnecessary operations or work on the vehicle that affect the vehicle trim height.
  4. Close the doors and verify that the luggage compartment is empty.
  5. Stabilize the suspension by rocking the vehicle sideways.
  6. Ensure that the fuel level is full.
  7. Ensure that the tires are inflated to the proper pressure.
  8. Ensure that the driver or a similar weight, approximately 75 kgs (165 lbs), is in the vehicle driver seat.
scientia non olet · About LEMON Manuals