LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 734 (Seat System) >> Repair Instructions >> Seat Adjuster Handle Replacement - Two-Way Manual >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front seat to the most rearward position.
  2. Remove the retaining clips from the seat adjuster release handle.
    Fig 1: Removing Seat Adjuster Handle Retaining Clip
    G01780585Courtesy of GENERAL MOTORS CORP.
  3. Remove the release handle from the seat track studs.
    Fig 2: Removing Seat Adjuster Release Handle
    G01780586Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals