LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 734 (Seat System) >> Repair Instructions >> Head Restraint Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the head restraint to the highest position.
  2. Remove the seat belt strap from the guide, if required.
  3. Insert a small flat-bladed tool onto the tab on the side of the guides.

    Pressing in one tab at a time while slightly pulling up on that side.

  4. Remove the head restraint by pulling upward and out.
    Fig 1: Removing Head Restraint
    G01780580Courtesy of GENERAL MOTORS CORP.