LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 733 (Seat Belt System) >> Repair Instructions >> Seat Belt Height Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat shoulder belt guide track (1) to the center pillar.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the front seat shoulder belt guide track bolts.

    Tighten 

    Tighten the front seat shoulder belt guide track bolts to 42 N.m (31 lb ft).

  3. Install the front seat shoulder belt guide track cover (2).
  4. Install the center pillar upper trim panel. Refer to TRIM PANEL REPLACEMENT - UPPER CENTER PILLAR .
    Fig 1: Installing Front Seat Belt Height Adjuster
    G01780862Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals