LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 733 (Seat Belt System) >> Repair Instructions >> Bracket Replacement-Child Seat Belt Restraint System >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion. Refer to SEAT CUSHION REPLACEMENT - REAR .
  2. Remove the rear seat back. Refer to SEAT BACK REPLACEMENT - REAR .

    If equipped with a split folding rear seat back refer to SEAT BACK REPLACEMENT - REAR SPLIT FOLDING .

  3. Remove the bolts from the child seat latch bracket.
  4. Remove the child seat latch bracket from the vehicle.
    Fig 1: Locating Child Seat Latch Bracket Bolts
    G01780885Courtesy of GENERAL MOTORS CORP.