LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 730 (Anti-Lock Brake System) >> Diagnostic Information and Procedures >> DTC C1295: Brake Lamp Switch Circuit Open >> Conditions for Setting the OTC

Conditions for Setting the OTC

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

The stoplamp switch input voltage is between 1.87 and 5.28 volts for 2 seconds.