LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 728 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - Rear (Extended Cab) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the retractor to the vehicle.
  2. Install the rear seat belt retractor to body bolt (1). Tighten the bolt to 53 N.m (39 lb ft).
  3. Install the rear quarter trim panel.
  4. Install the rear seat belt to body bolts (2). Tighten the bolts to 53 N.m (39 lb ft).
  5. Install the seat belt guide cover (1).
  6. Install the rear seat. Refer to SEAT REPLACEMENT - REAR (EXTENDED CAB W/4TH DOOR) , SEAT REPLACEMENT - REAR (EXTENDED CAB) , or SEAT REPLACEMENT - REAR (60/40 SPLIT) .
scientia non olet · About LEMON Manuals