Seat Belt Service Precautions

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Important: If the vehicle has been in a collision, refer to Repairs & Inspections Required After A Collision .

Do not bleach or dye the seat belt webbing. Use only the following items in order to clean the seat belt webbing:
- A mild soap and water solution
- A soft brush or cloth.
Keep sharp edges and damaging objects away from the seat belt. Do not bend or damage any part of the seat belt buckle or the latch plate. Replace any seat belts that are cut or damage in any manner.
Use only the correct seat belt anchor nuts/bolts. Tighten the correct seat belt anchor nut/bolt/screw to the correct torque value. Refer to Fastener Tightening Specifications .
Some seat belts and retractors require service as a set with service replacement components only. Do not repair individual component that must require service as a set.
Verify that the replacement part number is correct for the vehicle at that seating position. Do not substitute a seat belt from a different seating position.