LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 725 (Door System, Mirror System & Window System) >> Repair Instructions >> Handle Bezel Replacement - Inside >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inside Handle Bezel
    GM370110Courtesy of GENERAL MOTORS CORP.
  1. Position the door handle bezel in the door trim panel.
  2. Install the door handle bezel to the door panel by pressing the bezel into place until the bezel is completely seated.
scientia non olet · About LEMON Manuals