LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 725 (Door System, Mirror System & Window System) >> Repair Instructions >> Door Handle Replacement - Inside >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trim panel. Refer to Trim Panel Replacement - Side Front Door .
    2. Fig 1: Removing Inside Door Handle & Mounting Bolts
    GM348466Courtesy of GENERAL MOTORS CORP.
  2. Remove the mounting bolts from the inside door handle.
  3. Slide the inside door handle forward in order to release the unit from the door.
    4. Fig 2: View Of Control Rod To Inside Door Handle
    GM348468Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the control rod from the inside door handle.
  5. Remove the door handle assembly from the door.
scientia non olet · About LEMON Manuals