LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 721 (Engine Mechanical - 8.1L (On-Vehicle)) >> Repair Instructions >> Engine Sight Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Yukon XL, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Intake Manifold Sight Shield, Bolts & Retainer
    GM665445Courtesy of GENERAL MOTORS CORP.
  1. Loosen the intake manifold sight shield bolt (3).
  2. Remove the sight shield (2) from the sight shield retainer (1).
  3. Remove the sight shield bracket retainer nuts, if necessary.
  4. Remove the sight shield bracket (1), if necessary.
scientia non olet · About LEMON Manuals