LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Power Seat System) >> Repair Instructions >> Trim Panel Replacement - Front Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the trim panel on the seat
  2. Install the screws retaining the trim panel to the seat. Tighten the screws to 2 N.m (18 lb in).
  3. Install the remaining screws retaining the seat back release handle and the seat recliner handle to the seat. Tighten the screws to 2 N.m (18 lb in).
scientia non olet · About LEMON Manuals