Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Place the seat back clips on the retaining hooks.
- Install the rear storage compartment bracket, if removed.
- Install the seat retaining bolts (1). Tighten the seat retaining bolts to 55 N.m (41 lb ft).
- Fold the seat down.
- Pull the seat belt buckles through the seat cushion and seat back.