LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Power Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat-back frame (4) to the seat cushion frame.
  2. Install the bolts which retain the seat-back frame to the seat cushion frame. Tighten to 35 N.m (26 lb ft).
  3. Install the seat-back cover. Refer to Seat Back Cover & Pad Replacement - Rear .
  4. Install the armrest to the seat back. Refer to Armrest Replacement - Rear Seat (60/40 - 50/50 Split) .
  5. Install the seat to the vehicle. Refer to Seat Replacement - Rear (Extended Cab w/4th Door) , Seat Replacement - Rear (Extended Cab)  or Seat Replacement - Rear (60/40 Split)  .
scientia non olet · About LEMON Manuals