LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Power Seat System) >> Repair Instructions >> Seat Adjuster Replacement - Front (Power) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat from the vehicle. Refer to Seat Replacement - Front Bucket .
  2. Remove the seat trim panel. Refer to Trim Panel Replacement - Front Seat .
  3. Remove the seat cushion frame from the seat adjuster. Refer to Seat Cushion Frame Replacement - Front .
  4. Remove the inboard seat belt buckle and nut (1). Disconnect the electrical connection (2).
  5. Remove the seat back frame from the seat adjuster. Refer to Seat Back Frame Replacement - Front .
  6. Remove the seat back hinge/recliner mechanism. Refer to Seat Back Hinge/Recliner Mechanism Replace - Front .
  7. Remove the seat adjuster track cover. Refer to Seat Adjuster Track Cover Replacement - Front .
  8. Remove the memory module, if equipped. Refer to Memory Seat Control Module Replacement .
scientia non olet · About LEMON Manuals