LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Power Seat System) >> Repair Instructions >> Lumbar Replacement - Front Seat (Manual) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the lumbar assembly to the seat.
  2. Connect the lumbar cable (6) to the lumbar actuator (5).
  3. Rotate the top of the lumbar mechanism in order to clip the lumbar mechanism onto the bottom of the seat back frame.
  4. Attach the lumbar clip onto the top of the seat frame.
  5. Install the seat back cover and pad. Refer to Seat Back Cover & Pad Replacement - Front .
  6. Install the head restraint and guides. Refer to Head Restraint Replacement .
  7. Install the front seat in the vehicle. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals