Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the switch to the console panel.
- Install the retaining screw. Tighten the screws to 1.6 N.m (14 lb in).
- Connect the electrical connector.
- Install the center console end panel. Refer to CENTER CONSOLE END PANEL REPLACEMENT .