LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Power Seat System) >> Repair Instructions >> Heated Seat Switch Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat heater switch to the front trim panel by pressing the switch into place until the switch is completely seated.
  2. Connect the electrical connector to the front seat heater switch.
  3. Install the front trim panel. Refer to TRIM PANEL REPLACEMENT - SIDE FRONT DOOR .