LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Power Seat System) >> Repair Instructions >> Head Restraint Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the head restraint (1) to the full up position.
  2. Insert a paper clip or a similar tool in the hole at the side edges of the head restraint retainers.
  3. Press in on the tool in order to release the retainer clips (2).
  4. Lift the head restraint from the retainers.
    Fig 1: Head Restraint Replacement
    G01714253Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals