LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Power Seat System) >> Repair Instructions >> Armrest Replacement - Rear Seat (60/40 - 50/50 Split) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat armrest to the pivot point on the rear seat.
  2. Install the armrest bolts (6). Tighten the bolts to 9 N.m (80 lb ft).
  3. Install the armrest trim cover (7) and screws (8)
  4. Fold the right rear seat back into the upright position.
scientia non olet · About LEMON Manuals