LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 717 (Stationary Window System) >> Repair Instructions >> Rear Window Replacement (Pickup) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation Of Stationary Windows .
  2. Install the window lower garnish molding.
  3. Install both rear seat headrests (extended cab).
  4. Raise the rear seat back.
  5. Remove the double layer of masking tape around the perimeter of the painted surfaces and interior trim.
scientia non olet · About LEMON Manuals