LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 715 (Retained Accessory Power System) >> Diagnostic Information & Procedures >> Diagnostic System Check - Retained Accessory Power >> Test Description

Test Description

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The numbers below refer to the step numbers on the diagnostic table.

  1. 2)  - Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
  2. 4)  - This step is checking for DTCs in the BCM.
  3. 5)  - This step is checking for a malfunctioning BCM.
  4. 6)  - This step is checking for RAP specific DTCs.
Fig 1: Diagnostic System Check - Retained Accessory Power
G01713692Courtesy of GENERAL MOTORS CORP.