LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 711 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Lock Cylinder Replace - Console Compartment Door >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new lock cylinder (2) by pressing inwards until it is seated.
  2. Install the retaining clip (1).
  3. Ensure the linkage for the top compartment door are all connected before installing the inside panel.
  4. Install the inside panel.
  5. Install the 11 screws. Tighten the screws to 1.6 N.m (14 lb in).
  6. Inspect the operation of the top compartment door.
  7. Install the compartment door to the console.
scientia non olet · About LEMON Manuals