LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 711 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Knee Bolster Replacement (Luxury) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Snap the top of the knee bolster into the IP assembly.
  2. Install the knee bolster screws. Tighten the screws to 2 N.m (18 lb in).
  3. Install the IP cluster trim plate bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .
  4. Install the I/P extension to the IP. Refer to Instrument Panel (I/P) Extension Replacement (Luxury) , Instrument Panel (I/P) Extension Replacement (Non-Luxury)  or Instrument Panel (I/P) Extension Replacement (Pro)  .
scientia non olet · About LEMON Manuals