LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 711 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the I/P cluster harness to the I/P cluster.
  2. Install the I/P cluster onto the I/P with the screws. Tilt the top of the cluster into the retainer first to avoid damaging the flexible circuit connections.
  3. Install the screws that retain the I/P cluster to the I/P assembly. Tighten the screws to 2 N.m (18 lb in).
  4. Install the I/P cluster trim plate bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .
scientia non olet · About LEMON Manuals