LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 711 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Instrument Panel (I/P) Extension Replacement (Pro) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the IP extension to the console.
  2. Install the retaining screws. Tighten the retaining screws to 1.6 N.m (14 lb in).
  3. Install the 12V power supply. Refer to 12-Volt Power Supply Replacement .
  4. Connect all the wire connectors.
  5. Install the console in the vehicle.
  6. Install the 2 retaining bolts to the bracket. Tighten the 2 bolts to 1.6 N.m (14 lb in)
  7. Install the console. Refer to Console Replacement (Luxury Console) , Console Replacement (Base Console)  or Console Replacement (Pro)  .
scientia non olet · About LEMON Manuals