LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 711 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Console Storage Bin Replacement (Pro) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the console bin and lid assembly over the console in order to route the electrical cord to the console bin.
  2. Install the console bin and lid assembly to the console.

    Important:  Ensure the rear bolts has the bigger washer.

  3. Install the 4 console bin retaining bolts (1). Tighten the 4 bolts to 3.5 N.m (35 lb in).

    Important:  Ensure the longer, screw is installed in the front of the console bin.

  4. Install the 6 retaining screws (1). Tighten the 6 screws to 1.6 N.m (14 lb in).
scientia non olet · About LEMON Manuals