LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 711 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Console Replacement (Luxury Console) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the console assembly in the vehicle in other to connect the wire connector.
  2. Connect the wire connector.
  3. Install the console over the studs.
  4. Install the two front console bolts (1) to the front extension. Tighten the two bolts to 1.6 N.m (14 lb in).
  5. Install the bolt (2) to the subwoofer box, if equipped. Tighten the two bolt to 1.6 N.m (14 lb in).
  6. Install the console bezel. Refer to Instrument Panel (I/P) Extension Replacement (Luxury) .
  7. Install both front seats. Refer to SEAT REPLACEMENT - FRONT BUCKET .
scientia non olet · About LEMON Manuals