Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Important: The ashtray lid (1) and cupholder lid (2) must be in the open position.
- Open the ashtray lid (1) and cupholder lid (2).
- Partially install the bezel.
- Connect the electrical connectors.
- Install the lower bezel to the console.
- Push on the comers until the retainers are fully seated in place.
- Align the locating pins (1) on the upper bezel.
- Press in on the bezel until all retaining clips are fully seated.