LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 711 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Ashtray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ashtray housing to the lower I/P trim panel.
  2. Install the screws holding the ashtray housing to the rear of the I/P lower trim panel. Tighten the ashtray housing screws to 2 N.m (18 lb in).
  3. Connect the ashtray lamp wiring harness to the ashtray housing.
  4. Install the lower I/P trim panel.
  5. Insert the ashtray to the I/P by depressing the tab and sliding the ashtray forward.
scientia non olet · About LEMON Manuals