LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 711 (Instrument Panel, Gauges & Console) >> Repair Instructions >> 12-Volt Power Supply Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power supply fuse.
  2. Lift up the front cover of the socket.
  3. Insert the J 42059  into the socket sleeve. Tilt the tool so that the tool fits into the slots on the sides of the socket sleeve.
    Fig 1: Cigarette Lighter Socket Remover
    G01712774Courtesy of GENERAL MOTORS CORP.
  4. Hold the plastic ring in place. Pull the socket gently out of the assembly in order to remove the outlet.
    Fig 2: Pulling Socket Out From Assembly
    G01712775Courtesy of GENERAL MOTORS CORP.
  5. Remove the electrical connector from the socket.
scientia non olet · About LEMON Manuals