LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 710 (Horn Systems) >> Repair Instructions >> Horn Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Important:  Ensure that the black side of the horn is facing forward on the vehicle.

  1. Install the horn (2) to the radiator support (1). Left side and right side horn assemblies are shown.
  2. Install the horn bolt. Tighten the horn bolts to 9 N.m (80 lb in).
  3. Connect the horn electrical connector.
  4. Install the park/turn signal lamp assembly.
  5. Install the headlamp.
  6. Lower the hood.
scientia non olet · About LEMON Manuals