Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the speaker mounting bracket.
- Install the bolts (2) retaining the speaker mounting bracket to the door, if removed. Tighten the bolts to 6 N.m (53 lb in).
- Install the speaker to the mounting bracket.
- Connect the electrical connector to the speaker.
- Install the screws (1) that retain the speaker to the mounting bracket. Tighten the screws to 2 N.m (53 lb in).
- Install the door trim panel. Refer to TRIM PANEL REPLACEMENT - SIDE REAR DOOR (CREW CAB) .
- Verify the component operation.