Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the speaker to the console.
Important: Do not exceed torque specification. Over tightening of the nuts will result in the stud breaking from the console.
- Install the retaining nuts. Tighten the retaining nuts to 0.7 N.m (6.2 lb in).
- Connect the electrical connector (2).
- Install the center console bezel. Refer to BEZEL REPLACEMENT - FLOOR CONSOLE (LUXURY) .