LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 705 (Wiper System & Washer System) >> Repair Instructions >> Washer Pump/Reservoir Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the washer solvent container into the vehicle.
  2. Install the lower bolts. Tighten the bolts to 9 N.m (80 lb in).
  3. Install the upper bolt. Tighten the bolt to 9 N.m (80 lb in).
  4. Connect the electrical connector to the washer pump.
  5. Connect the electrical connector to the washer solvent level sensor.
  6. Connect the washer hose to the washer pump.
  7. Install the inner wheel housing.
  8. Install the battery and battery tray.