LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 704 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement (Pickup) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector.
  2. Install the high mounted stop lamp to the vehicle.
  3. Install the high mounted stop lamp screws. Tighten the high mounted stop lamp screws to 2 N.m (17 lb in).
  4. Inspect the operation.
scientia non olet · About LEMON Manuals