LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 696 (Door System, Mirror System & Window System) >> Repair Instructions >> Handle Bezel Replacement - Inside >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors, if any, to the inside door handle bezel.
  2. Install the memory seat switch into the door handle bezel.
  3. Slide the inside door handle through the opening in the door handle bezel.
  4. Insert the tabs on the rear of the bezel behind the door trim panel.
  5. Snap the front of the door handle bezel into place.
    Fig 1: Installing Door Handle Bezel
    G01803496Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals