LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 694 (Body Front End) >> Repair Instructions >> Seal Replacement - Plenum to Hood >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open and support the hood.
  2. Starting at the center of the weatherstrip, pull the weatherstrip forward and pull the weatherstrip off of the flange.
    Fig 1: Identifying Plenum-To-Hood Seal
    G01755696Courtesy of GENERAL MOTORS CORP.
  3. Remove the weatherstrip from the flange.
scientia non olet · About LEMON Manuals