LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 694 (Body Front End) >> Repair Instructions >> Seal Replacement - Plenum to Hood >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the weatherstrip to the flange.
  2. Fig 1: Identifying Plenum-To-Hood Seal
    G01755697Courtesy of GENERAL MOTORS CORP.
  3. Starting at the passenger side corner, press the weatherstrip onto the flange. Work toward the center of the car.
  4. Close the hood.