LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 691 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the buckle assembly.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the fastener.

    Tighten 

    Tighten the fastener to 26 N.m (19 lb ft).

    3. Fig 1: Installing Seat Belt Buckle
    G01804183Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the buckle.
  4. Install the seat adjuster track cover. Refer to SEAT ADJUSTER TRACK COVER REPLACEMENT -- FRONT .
  5. Install the seat assembly. Refer to SEAT REPLACEMENT -- BUCKET .
scientia non olet · About LEMON Manuals