LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Engine Cooling System) >> Repair Instructions >> Water Pump Outlet Pipe Replacement (6.6L Engine) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new O-ring seal on the water pump outlet pipe.
  2. Lightly lubricate the O-ring seal with engine oil.
  3. Install the water pump outlet pipe in the engine oil cooler assembly.
  4. Install a new water pump outlet pipe to water pump gasket.
  5. Install the water pump.
  6. Install the left front fender wheelhouse inner panel (1).
scientia non olet · About LEMON Manuals