LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Engine Cooling System) >> Repair Instructions >> Turbocharger Coolant Bypass Valve Replacement (6.6L Engine) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the turbocharger bypass valve and sealing washer to the water outlet tube. Tighten the turbocharger bypass valve to 60 N.m (44 lb ft).
  2. Connect the turbocharger coolant hose to the turbocharger bypass valve.
  3. Install the upper intake manifold cover.
  4. Install the upper intake manifold cover to the outlet duct.
  5. Tighten the outlet duct clamp at the upper intake manifold cover. Tighten the clamp to 6 N.m (53 lb in).
  6. Fill the engine coolant. Refer to Draining & Filling Cooling System .
scientia non olet · About LEMON Manuals