LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Engine Cooling System) >> Repair Instructions >> Radiator Vent Inlet Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the vent inlet hose to the surge tank.
  2. Reposition the vent inlet hose clamp to the surge tank.
  3. Install the vent inlet hose to the radiator.
  4. Reposition the vent inlet hose clamp to the radiator.
  5. Fill the cooling system. Refer to Draining & Filling Cooling System .
scientia non olet · About LEMON Manuals