LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Replacement - Outlet (8.1L Engine) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the outlet hose from the water pump.
  2. Position the outlet hose clamp the water pump.
  3. Install the surge tank outlet hose (2) from the surge tank.
  4. Position the surge tank outlet hose clamp at the surge tank.
  5. Install the radiator outlet hose to the radiator.
  6. Position the outlet hose clamp at the radiator.
  7. Fill the cooling system. Refer to Draining & Filling Cooling System .
scientia non olet · About LEMON Manuals