LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Replacement - Outlet (6.6L Engine) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the radiator outlet hose to the vehicle.
  2. Install the radiator outlet hose and clamp to the radiator. Ensure the hose is positioned properly in order to prevent interference with the fan shroud.
  3. Install the radiator outlet hose clip retainers to the brackets.
  4. Install the surge tank outlet hose (2) to the surge tank.
  5. Install the radiator outlet hose and clamp to the water pump.
  6. Install the heater outlet hose to the radiator outlet hose.
  7. Install the upper and lower fan shroud. Refer to Fan Shroud Replacement - Upper (W/O M74) , Fan Shroud Replacement - Upper (W/M74)  or Fan Shroud Replacement - Lower  .
  8. Fill the engine coolant. Refer to Draining & Filling Cooling System .
scientia non olet · About LEMON Manuals