LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Replacement - Outlet (4.3L Engine) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the radiator outlet hose to the radiator.
  2. Install the radiator outlet hose to the water pump.
  3. Install the radiator outlet hose to the surge tank.
  4. Align the hinge clip with the lip on the throttle body. Install the air inlet tube and resonator to the throttle body by pivoting the air inlet tube and resonator downward until the mounting stud is through the hole in the air inlet tube.
  5. Install the resonator retaining wing nut.
  6. Connect the PCV hose to the air cleaner outlet duct.
  7. Connect the MAF/IAT sensor assembly harness connector.
  8. Fill the cooling system. Refer to Draining & Filling Cooling System .
scientia non olet · About LEMON Manuals