Removal Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Important: Most truck models use a spring-type hose clamp at the hose connections. When using this type of clamp, install the radiator hoses on dry, non-painted surfaces in order to ensure proper sealing.
Reusing the spring-type clamps on aftermarket hoses is not recommended.
- Drain the cooling system. Refer to Draining & Filling Cooling System .
- Reposition the inlet hose clamp at the radiator.
- Remove the inlet hose from the radiator.
- Reposition the inlet hose clamp at the water crossover.
- Remove the inlet hose from the water crossover.