LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Replacement - Inlet (6.6L Engine) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the radiator inlet hose to the water outlet tube.
  2. Install the radiator inlet hose to the radiator.
  3. Install the hose clamps on the radiator outlet hose.
  4. Fill the engine coolant. Refer to Draining & Filling Cooling System .
scientia non olet · About LEMON Manuals